HOME > Products > Automotive Solutions
> C-V2X Solutions
C-V2X Solutions
WNC's C-V2X Module has a compact LGA form factor aimed at automotive applications such as for OBU and TCU. The mPCIe Card is equipped with standard mPCIe compliant pin-outs perfect for RSU products and provides a significant upgrade from previous designs.
C-V2X On-Board Unit

- i.MX 8 based application processor
- Wireless LAN
- BT 4.1
- 1000 Base-T Ethernet
- Supports CAN-FD interfaces
- Scalable C-V2X functions (PC5)
- Supports QDR3 (dead reckoning)
- Equipped with ITS stack
- Antennas: C-V2X × 2, GNSS × 1, Wireless LAN (chip antennas) × 2
- Data interface: Ethernet × 1, USB 3.0 (Type C) × 1, USB 2.0 (OTG) × 1, CAN × 1
- Debug interface: USB 2.0 × 1
- Hardware Security Module (HSM): NXP SXF1800
- Dimensions: 193 mm × 160 mm × 51 mm
- Operating temperature: -20°C–70°C (fully compliant with 3GPP)
- Storage temperature: -40°C–85°C
C-V2X RSU
- i.MX 8 based application processor
- 5.9 GHz C-V2X (PC5)
- 5.9 GHz DSRC
- POE: supports IEEE 802.3at
- 1000 Base-T Ethernet
- GNSS: GPS, GLONASS, Galileo, Baidou
- RAM: LPDDR4 3 GB
- FLASH: eMMC 8 GB
- Ingress protection class: IP67
- Dimensions: 190 mm × 250 mm × 60 mm
- Operating temperature (Normal): -40°C–75°C
- Storage temperature : -40°C–85°C
C-V2X Module

- Supports low latency direct communications (PC5)
- Security and privacy on V2V/V2I/V2P as per IEEE WAVE and ETSI ITS security services
-
MCP Memory: LPDDR2 (2 Gb) with NAND (4 Gb)
USB 3.0 - Supports SIM-less operation
- Supports GNSS
- PCI Express interface
- BLSP Port × 4 (UART/I2C/SPI)
- Configurable General Purpose I/O
- RF Interface: 3 RF pads for TX1/PRX1, DRX and GNSS
- Input Voltage: 4.75 V to 5.25 V
- LGA Module: 299 LGA contacts
- Dimensions: 40 mm × 30 mm × 3.45 mm
- Temperature: –40°C to +85°C
C-V2X mPCIe Card
.png)
- Supports low latency direct communications (PC5)
- Security and privacy on V2V/V2I/V2P as per IEEE WAVE and ETSI ITS security services
- MCP Memory: LPDDR2(2Gb) with NAND(4Gb) USB 2.0
- Supports SIM-less operation
- Supports GNSS
- Configurable General Purpose I/O
- RF Interface: 3 RF MMCX connectors for TX1/PRX1, DRX and GNSS
- Input Voltage: 3.3 V to 12 V
-
Standard mPCIe interface compatible
- Suitable for extending C-V2X function to RSU
- Dimensions: 44.15 mm × 50.95 mm × 6.6 mm
- Temperature: –40°C to +85°C
Contact Us
We are always developing new products to realize the promise of the C-V2X solutions. Any inquiries or special design requests are welcome.
- Sales Representatives
Imari Swanson
Mobile: 810-875-7492
Brendan McCarthy
Mobile: +1 248 736-0461
Stevie Lu
Tel: +886-3-6667799
Ext: 3658